BCU: Setting Up the Computer - This video explains how to properly configure a standalone PC for Vocera/Stryker badge configuration, including required network settings and firewall adjustments.

BCU: Installing the software - This video explains the importance of the Vocera Badge Configuration Utility (BCU) for preparing Stryker and Vocera wearable devices, including installing the software and ensuring devices are properly configured with network settings and firmware. It also walks through the installation steps, required permissions, and how to verify or update firmware versions to ensure devices function correctly in a production environment.

BCU: EnGenius EAP 9550 Configuration - This video demonstrates how to configure an nGenius EAP9550 router as a standalone access point to create an open “vocera” network for wearable device setup. It covers connecting the router to a PC, accessing the admin interface, configuring wireless settings and security, and updating network/IP settings to prepare the device for configuration use.

BCU: GL.iNET Router Configuration - This video demonstrates how to configure a GL.inet router as a standalone access point with an open network to support Vocera and Stryker wearable device setup. It walks through connecting the router, updating network settings, and configuring both 5 GHz and 2.4 GHz Wi-Fi networks with specific required parameters to ensure successful device configuration.

BCU: tp-link Archer A6 Router Configuration - The video shows how to configure a TP-Link Archer A6 router as a standalone access point to create an open network for Vocera and Stryker device setup, including proper LAN connection and manual configuration in the web interface. It details setting up both 2.4GHz and 5GHz networks with the SSID “vocera,” no security, specific channel settings, and an optional IP address change to simplify future access.